When a trimmer head fails in peak season, the clock starts running. Your crew loses time, the route slows down, and a small part turns into a bigger problem.
The Veri VP35-5 Pro Bump & Feed Trimmer Head is built for crews that need one replacement head to cover most of the straight-shaft trimmers on the trailer. It ships with adaptors designed to fit approximately 97% of popular straight-shaft trimmers, including many Echo, Stihl, Husqvarna, RedMax, Shindaiwa, and Maruyama models.
If your crew runs more than one trimmer brand, that matters. One spare head on the shelf can cover most of the fleet.
Quick answer: what does the Veri VP35-5 fit?
The Veri VP35-5 fits most straight-shaft string trimmers. It is commonly used with commercial trimmers from Echo, Stihl, Husqvarna, RedMax, Shindaiwa, Maruyama, and other major brands.
Important: The VP35-5 is for straight-shaft trimmers only. It is not made for curved-shaft models.
What is the Veri VP35-5 trimmer head?
The VP35-5 is a professional bump-feed replacement trimmer head. It advances line when you tap the head against the ground, so your crew can keep trimming without stopping to pull line by hand.
It is manufactured, assembled, and packaged in the USA. For commercial crews, the biggest benefit is simple: fewer part numbers to manage and fewer stops during the workday.
What trimmer brands work with the VP35-5?
The VP35-5 ships with universal adaptors that fit approximately 97% of popular straight-shaft trimmers. That includes many models from:
- Echo straight-shaft trimmers, including many SRM models
- Stihl straight-shaft trimmers, including many FS models
- Husqvarna straight-shaft trimmers
- RedMax straight-shaft trimmers
- Shindaiwa straight-shaft trimmers
- Maruyama straight-shaft trimmers
- Other major commercial straight-shaft trimmer brands
Before ordering, confirm that your trimmer has a straight shaft. If you are unsure, check the manual or contact Mowmore with your model number.
Bump feed vs. fixed-line heads
Both styles have a place. The right choice depends on the work your crew does most often.
Bump-feed heads advance line when the head is tapped on the ground. They work well for daily maintenance routes, edging, trimming around beds, and fence-line work. Crews can reload in the field and keep moving.
Fixed-line heads hold pre-cut pieces of line. Some crews like them for heavy trimming or brush work with thicker line. The tradeoff is downtime. When the line wears out, you stop and reload the head.
For most commercial maintenance routes using .080 to .095 trimmer line, a bump-feed head is the better everyday setup.
Why commercial crews use the VP35-5
One head covers most of the trailer
Most crews do not run one trimmer brand forever. A trailer may have Echo, Stihl, and Husqvarna units sitting side by side. The VP35-5 helps reduce the number of replacement heads you need to keep on hand.
Less stopping during the route
The bump-feed design keeps line moving with a quick tap. That matters on high-volume maintenance days when every stop adds up.
Made in the USA
The VP35-5 is manufactured, assembled, and packaged in the USA.
Fast replacement when a head wears out
The adaptor kit makes the swap straightforward on compatible straight-shaft models. Less time replacing parts means more time finishing properties.
How to install the Veri VP35-5
- Turn the trimmer off completely before starting.
- Remove the existing trimmer head from the drive shaft.
- Check your trimmer manual for thread direction. Some models are reverse-threaded.
- Select the correct adaptor from the VP35-5 kit.
- Thread the adaptor onto the drive shaft and tighten it securely.
- Attach the VP35-5 head to the adaptor.
- Load trimmer line according to the head instructions.
- Test the bump-feed action before sending it back into the route.
Frequently asked questions
What is the Veri VP35-5 trimmer head?
The VP35-5 is a professional bump-feed replacement trimmer head for straight-shaft string trimmers. It ships with adaptors designed to fit approximately 97% of popular straight-shaft trimmers.
Does the VP35-5 fit Echo trimmers?
Yes, it fits many Echo straight-shaft trimmers, including many SRM models. It does not fit curved-shaft models.
Does the VP35-5 fit Stihl trimmers?
Yes, it fits many Stihl straight-shaft trimmers, including many FS models. Confirm your shaft type before ordering.
Does the VP35-5 fit Husqvarna trimmers?
Yes, it fits many Husqvarna straight-shaft trimmers. Check your model before ordering if you are unsure.
Can I use the VP35-5 on a curved-shaft trimmer?
No. The VP35-5 is made for straight-shaft trimmers only.
What trimmer line works with the VP35-5?
The VP35-5 works with standard commercial trimmer line. Many maintenance crews run .095 line for everyday trimming. For help choosing line diameter, read our String Trimmer Line Size Guide for Commercial Crews.
Where is the Veri VP35-5 made?
The VP35-5 is manufactured, assembled, and packaged in the USA.
Keep spare trimmer heads on hand before the route slows down
A worn-out trimmer head should not hold up a full crew. Keep a few VP35-5 heads on the shelf so you can replace a failed head fast and get the trimmer back on the trailer.
Shop the Veri VP35-5 Pro Bump & Feed Trimmer Head at Mowmore. We offer wholesale pricing well below typical dealer rates and same-day or next-day shipping on most orders.
Need line to go with it? Mowmore stocks commercial trimmer line in .080, .095, and .130 across multiple spool sizes. Read our guide to choosing the right trimline or stock up before peak-season wear starts costing you time.